XADO NEW ZEALAND · Secure online shopping and local support. Browse products

Engine · Transmission · Fuel system · Steering

Care for your car before problems start.

Explore XADO for preventive care and wear-related concerns. Choose your vehicle and maintenance goal, or find guidance for a symptom.

Guidance, not a diagnosis. Check compatibility and the current product label before use.

EX120 Automatic Transmission — official manufacturer product image

TRANSMISSION / CVT

EX120 Automatic Transmission

Targeted transmission care.

Manufacturer reference packaging. Confirm the NZ SKU and supplied label.

Explore this product →

01 / 08

New Zealand supportSpeak to the local XADO teamClear NZ pricingNZD · GST-inclusive product pricesSource-labelled guidanceCustomer reports ≠ controlled tests

Two easy ways to get started

New to XADO or unsure?

Find a treatment for your situation

Choose your vehicle and what you notice to see the matching product.

Buying again?

Find your product in seconds

Search by product name or SKU. No vehicle questionnaire is needed to browse the catalogue.

Search the NZ range

Start with a familiar symptom

These shortcuts select a starting point only. They do not confirm a fault, enter a fluid capacity or approve a treatment.

PREVENTIVE CARE

Keep caring for a car that runs well.

XADO wear-protection treatments can be considered as part of routine care for suitable, mechanically serviceable systems. Choose the product for your engine or transmission and follow its instructions alongside your vehicle's maintenance schedule.

Protect working surfaces

Explore engine or transmission wear protection even when there is no noticeable symptom.

Clean at the right time

TotalFlush is an oil-system cleaner used before an oil and filter change, when cleaning is appropriate.

Use the right interval

Treatment cycles and repeat intervals vary. A long-term wear treatment is not automatically needed at every oil change.

Preventive care questions

What about electric and hybrid vehicles?

Electric and hybrid vehicles can have oil-lubricated gears. EX120 for gearboxes and reducers may be considered where the component uses compatible gear oil; confirm the exact unit, fluid and supplied instructions. ATF, e-drive fluids and shared motor-cooling circuits need separate compatibility checks. A hybrid also has a combustion engine: suitable XADO engine wear protection can be part of its maintenance. Select by the system being treated, not just the powertrain name.

Can I use XADO if my car has no symptoms?

Yes, suitable XADO wear-protection products have a preventive-care role. Check the exact vehicle, system, fluid specification and supplied label. For a new or rebuilt engine, also check running-in instructions and the vehicle manufacturer's requirements.

Should I add it before or after an oil change?

TotalFlush is used in the old engine oil before changing the oil and filter. Plan an AMC or EX120 wear treatment so its full treatment cycle can finish before the next oil change. Follow the instructions for your exact product; do not use one timing rule for every additive.

Do I need another treatment at every oil change?

Not automatically. Follow the repeat interval on your product label. XADO's AMC Maximum 225 ml reference instructions describe a 1,000–1,500 km treatment cycle and recommend repeat treatment after 100,000 km. Check that the supplied version matches those instructions. Continue normal vehicle servicing.

Can an additive replace servicing or mechanical repairs?

No. Keep using the specified oil and normal service schedule. Severe slipping, loss of drive, overheating or an oil-pressure warning needs diagnosis before treatment.

I KNOW WHAT I NEED

Shop & search the NZ range

Buy XADO engine oil additives, transmission treatments and engine cleaners in New Zealand. Choose a product below or search by name or SKU.

Browse product details on this site. Check current availability and order online.

Official manufacturer photographs are shown for product identification. Regional packaging and printed product codes may differ. The NZ SKU and the label supplied with your product take priority.

Loading the product catalogue…

NOT SURE? ASK BEFORE YOU BUY.

Contact us

Not sure about the model, fluid capacity or the product you used before? Send the vehicle year/model, transmission type, symptoms and any warning lights. You do not need to guess.

Email sales@xado.co.nz Call 021 776 319

For severe slipping, loss of drive, low oil pressure or overheating, arrange a mechanical diagnosis first.

top of page

Product Selection by Problem Solving

Noise in Manual Transmission

Manual Transmission makes noise in a used car.

If the noise in manual transmission is still heard when depressing clutch with operating engine and neutral gear, then the clutch release bearing needs to be replaced. If the noise level has decreased, then the problem might be in wear of the operating surfaces of gears and bearings.

Applying Revitalizant ® allows restoring worn out surfaces and this will decrease noise level in gearbox.

Recommendations

Manual Transmission makes noise in a new car.

A specific feature of some gearboxes is that they initially produce some noise when operating. In some cases this noise goes away with time, when the transmission parts break in. If the noise remains the same, then the probable reason for that may be gears’ tooth changeover because of not precise manufacturing of tooth gears or valves. When engaging tooth go very tightly, become deformed and produce noise.

When the tooth changeover rate is not high then application of Revitalizant® for gearboxes will be an effective way to decrease noise.

Back to Product Selection >>>

bottom of page

Find products by problem

Choose your vehicle type, then select a symptom below. Your matching product appears immediately.

Vehicle / use case

Product matches are guidance, not a diagnosis.